Ideal Solution for Low Power Modules:Able to connect 2 modules in parallel to a single optimizer1 male and 1 female Y BranchDouble insulated PV WireMC4 connectorsMax System Voltage 600V (UL)/ 1000V (IEC)Max Current 30ABuy Solar Y Branch MC4 Connector 30A in Nigeria now...

eBox-WIFI-01 is a serial port server that realizes the WIFI communication function of the solar controller and inverter of our company. It can realize wireless monitoring and parameter setting of the system with a mobile APP. Plug and play, easy to set up, and has many excellent features.eBox-WIFI-01 line length 2 meters, communication distance up to 50 meterseBOX-WIFI-01 RS485 to Wifi Adapter, Re..

USB to RS-485 converter is used to monitor each controller on the network using Solar Station PC software. The length of cable is 1.5m. The CC-USB-RS485-150U connects to the RS-485 Port on the controller.CC-USB-RS485-150UPC communication Cable(For the controller with RJ45 Connector)Package : 1x CC-USB-RS485-150U Cable..

MC connector systemsThe components of the MC connector system for photovoltaics are designed to allow time-saving and safe serial and parallel wiring of PV modules for building integrated and free-standing solar installations. For practical use the connector system MC4 are available, depending on the existing modules or inverters.The interlockable MC4 connector systemsn Di..

The MidNite Solar Surge Protector Device (MNSPD) is a Type 1 device per UL1449 rev3. It is designed for both AC and DC systems and provides protection to service panels, load centers or where the SPD is directly connected to the electronic device requiring protection. The DC SPD will work well on all DC circuits up to 300 volts as well as any 120/240 VAC circuits. The difference between the A..

The MidNite Solar Surge Protector Device (MNSPD) is a Type 1 device per UL1449 rev3. It is designed for both AC and DC systems and provides protection to service panels, load centers or where the SPD is directly connected to the electronic device requiring protection. The DC SPD will work well on all DC circuits up to 300 volts as well as any 120/240 VAC circuits. The difference between the A..

The MidNite Solar Surge Protector Device (MNSPD) is a Type 1 device per UL1449 rev3. It is designed for both AC and DC systems and provides protection to service panels, load centers or where the SPD is directly connected to the electronic device requiring protection. The DC SPD will work well on all DC circuits up to 600 volts as well as any 120/240 VAC circuits. The difference between the A..

The Whiz Bang Jr is a current sense module that attaches to the standard 50mv / 500A Shunt and wires into the Classic and KID Charge controllers to give Amperage readings from the shunt. This allows for EndAmps to function based on System amps or Classic amps.Type 1 environmental ratingWarranty – 5 yrs.Made in the USA..

The New Ethernet MeterBus Converter (model: EMC-1) enables IP based network and internet connectivity to any Morningstar product that features an existing MeterBus port (RJ-11) including:TriStar MPPTProStar MPPTSunSaver MPPTTriStar PWMProStar Gen3SunSaver DuoSureSine InverterThe EMC-1 is powered by connecting it to the Morningstar product’s MeterBus port or the DC input for 12,..

BMV-712 SmartWith Bluetooth built-in, the BMV Smart is ready for the Internet of Things (IoT) era. With Bluetooth being implemented in most other Victron Energy products, wireless communication between products will simplify system installation and enhance performance...

Panels and system monitoringThe Color Control GX is the communication-centre of your installation. It offers at-a-glance live information, and lets you control all products connected to it. Full system control is gained - almost anywhere in the world - by accessing your Color Control GX using our free-to-use Victron Remote Management Portal Intuitive system overview - all ..

Lynx Power InA modular DC bus bar, used to connect batteries to the Lynx DC distribution system...

SmartShuntThe Smart Battery ShuntThe SmartShunt is an all in one battery monitor, only without a display. Your phone acts as the display. The SmartShunt connects via Bluetooth to the VictronConnect App on your phone (or tablet) and you can conveniently read out all monitored battery parameters, like state of charge, time to go, historical information and much more.Alternatively the SmartShunt can ..

SmartSolar Control displayThe Victron Energy SmartSolar Control Display is a pluggable LCD display for the SmartSolar Charge Controllers. Simply remove the rubber seal that protects the plug on the front of the controller and plug-in the display...

VE.Direct cableThe Victron Energy VE.Direct cable is available in different lengths. There is a straight and 90 degree angle model. ..