MidNite Solar MNDC175 DC Disconnect mini 175Amp
- Brand: MidNite Solar
- Product Code: MNDC175
- Availability: In Stock
Midnite Solar MNDC175 Mini125 Amp DC Disconnect
The Mini-DC was designed to take into account many different types of renewable energy installations. These installation instructions will describe and show some of the more common possibilities.
Features
- Aluminum chassis. (no rust in the tropics or around salt water)
- Hinged door for easy access to electrical circuits
- Inverter breaker included (125, 175 or 250 amp)
- Din rail for DC circuits such as PV in, Chg Cntrl out, DC-GFP, DC loads, PV combiner
- Ground bus bar with 14 poles
- Six mounting spots for 500 amp, 50mV shunt
- Mounting spot for insulated bus bar (for PV negative connection point)
- Knock outs for inverter and battery cables, charge control mounting, DC & PV in & out
- 5/16” diameter stud for battery negative tie point
Battery Life SaverBattery Desulfator for 48V Electric Vehicles or Battery BanksBLS-48ABLS-48A is designed for use in 48 volt renewable energy battery banks or use with battery powered vehicles (Use the (BLS 48N) for 48 volt golf carts). Ideally mounted full time to constantly keep the batteries in optimum condition, the BLS-48A comes with 3/8″ eye rings for attachment to the battery terminals..
50mV/500amp includes taptite mounting screws. Has two 8-32 tapped holes on one end to attach a bus bar. This is the industry standard shunt...
MNBCMS MidNite Battery Capacity MeterThe “S” version (MNBCMS) of the meter has an additional short wire attached. This wire is the “Switched lead” This feature allows the LEDS to be turned off while retaining the Battery Care memories. This wire should be connected through a fused switch to Battery positive. This is usually the ignition switch of a vehicle, but can also be any type of push button,..
Battery Fuse Disconnector 250AApplication ScopeThunderVolt fuse switch disconnector is applicable to high short circuit current circuit with AC 50(60)Hz, voltage up to 660V and rated working currentup t0 630A. Fuse Switch disconnector possesses upper and lower end input and output structure. Lead in equipment with knife-edge and arcextinguishing equipment, and also can be operated with load. It is..
